air furnace
英 [eə(r) ˈfɜːnɪs]
美 [er ˈfɜːrnɪs]
反射炉；鼓风炉；空气炉
双语例句
- The heat source may be steam, heat conduction oil, electricity or coal ( oil) hot air furnace.
热源可采用蒸汽、导热油、电或燃煤（油）热风炉配套。 - A formula of heated wall temperature of a hot air furnace was derived in this paper.
推导了热风炉受热面壁温的计算公式。 - Numerical Simulation for Cold Blast Distribution Feature of Grid-type Burner of Hot Air Furnace; Numerical Simulation of LNG Submerged-Combustion Vaporizer
栅格式燃烧器冷风配气特性数值模拟LNG沉浸式燃烧型气化器数值模拟 - The moderation of the blast furnace has been pr omoted development and progressive of heating technology for hot air furnace.
高炉现代化推动和促进了热风炉加热技术的发展与进步。 - Studies the fuel kinds, the exit gas temperature of the hot air furnace, the excess air coefficient and the air moisture and temperature 'influence for waste heat loss.
研究了燃料种类、热风炉的排烟温度、过量空气系数以及燃烧空气湿度和温度对排烟热损失的影响规律。 - Hot air furnace is the equipment which provides clean air for dryer.
热风炉是为干燥设备提供洁净空气的设备，通常利用燃料燃烧的热量作热源。 - Numerical Investigation of Turbulent Mixing in a High Temperature Air Combustion Furnace
高温空气燃烧炉内湍流混合特性的数值研究 - Brazing process between PTC ceramic and aluminium alloy within air heated furnace is studied.
研究了采用钎焊方法，在空气加热炉中实现PTC陶瓷材料与铝合金的连接问题。 - The application and analysis of energy saving about condensing gas-fired hot air furnace of the heating system in China
冷凝式燃气热风炉在我国采暖中的应用及其节能分析 - Many factors have comparatively great effect on the temperature of reheat steam, such as characteristics of coal, coefficient of excessive air at furnace outlet, effect of soot blowing, temperature of main steam, and the height of the center of furnace combustion.
锅炉的煤质特性、炉膛出口过量空气系数、吹灰效果、主蒸汽温度和炉膛火焰中心高度等因素均对再热蒸汽温度的高低有较大影响。 - Describes the design experiences of the all air air conditioning systems with a gas burned warm air furnace and electric compressive refrigeration unit and floor air supply registers in villas.
以一别墅小区空调系统设计为例，介绍了采用燃气暖风炉&电制冷一体机和地板送风口的别墅住宅全空气空调系统设计经验。 - Hot Air Furnace& Hot Air Cylinder used in Naked Oats Processing
莜麦加工工艺关键设备热风炉、热风滚筒的研制与应用 - Air cushion furnace for continuous heat treatment of metal plate-strip is a progressively updated heat treatment device.
气垫炉是一种先进的金属板带材连续热处理设备； - The analysis and experiment of plate-strip floating height in air cushion furnace
气垫炉板带材漂浮高度的解析与试验 - Regressive analysis of blower power consumption for air cushion furnace
气垫炉风机功率消耗的回归分析 - The Research on Sleeve Type Highly Efficient Hot Air Furnace for General Use Heated Indirectly by Coal
套筒式燃煤高效间接加热通用热风炉的研究 - Air or furnace cooling from different solution treatment temperatures produced various morphologies of α and β phases.
自各固溶温度空冷或炉冷，获得各种形态的α相和β相。 - Behavior of hot air furnace
Air（初三适用）热风炉的热工行为 - Construction and Design of Clean Combustion Heated Air Furnace
洁净燃烧热风炉结构与设计 - Improvement of the Temperature of Exhaust-gas of Air Furnace
提高热风炉废气温度在安钢的应用 - In one workshop the copper concentration powder is roasted by the air furnace for producing copper sulfate. The 66.3% copper in the copper concentration powder is changed into copper ferrite. The leaching efficiency of the copper is only 33.6%.
某厂以自然通风炉焙烧铜精粉来生产硫酸铜，66.3%的铜以铁酸铜形式存在，铜的浸出率仅有33.6%。 - A study of gas dynamics process in air cushion furnace of continuous heat treatment for metal plate-strip
气垫式金属板带材连续热处理炉内气体动力过程的研究 - The paper analyses the main damage forms and reasons of hot-air furnace, puts forward several measures of prolonging service life of hot-air furnace and makes a reference for designer and user of hot-air furnace.
本文分析了热风炉损坏的主要形式和原因，提出了延长热风炉使用寿命的多项措施，供热风炉设计者和使用者参考。 - Fuzzy Control System for Combustion of Hot Air Furnace
热风炉燃烧模糊控制系统 - The Design of Charcoal Flame Air Furnace with Fast-melt, Energy-saving Features
速熔省能焦炭火焰反射炉的设计 - Numerical Simulation of Furnace-Flow Properties Effected by Fuel Injection in High Temperature Air Combustion Furnace
燃气喷射对高温空气燃烧室内流动影响的数值研究 - Studying about wind speed-temperature relay of warm air furnace explosion-pro of device
热风炉防爆装置的风速温度继电器的研究 - Application of the Full Automatic Horizontal Seam Welder in the Installing Work of Hot-air Furnace
全自动横缝焊机在热风炉安装中的应用 - The brazing of aluminium alloy 6063 on different thermal parameters in air furnace with proper technical measures was tested. The appearance of the hazed ioints and the metallographic microstructure as well as the shearing strenth were checked and analysed.
采用不同加热制度在空气炉中进行6063铝合金的钎焊试验，并对钎焊接头进行了外观、金相及剪切强度的检测分析。